Top Product Lines
ARM Cortex-M SBCs
Our Bambino, Lincoln and Eagle product lines take advantage of the high efficiency and low cost of the ARM Cortex-M microcontrollers by NXP and Texas Instruments. Starting below $25 in single quantities, these controllers are a great choice for data loggers, process controllers, smart instruments and many other applications.
| Bambino 210 (New!) | Eagle 50 |
| Bambino 200 | Eagle 100 |
| Lincoln 60 | picoJTAG |
ARM Linux SBCs
Our Electrum product line is based on the the ARM9 with Debian Linux. With a 400 MHz Atmel AT91SAM9G20 and starting below $100 in single quantities, the Electrum offers unparalleled price/performance for applications that require reliable multitasking and extensive networking functionality.
| Electrum 100 |
| Electrum 200 |
Domino Modules
Our highly popular Domino modules are used in thousands of installations worldwide. Programmable in BASIC and with the most popular I/O interfaces, you can get your embedded application up and running very quickly!
| Modules | RTC Boards |
| Components | BCC Boards |
Micromint USA
Bambino 200 (copy)
Bambino 200
Overview
The Micromint Bambino 200 is the first multi-core SBC compatible with the .NET Gadgeteer and mbed frameworks. These popular frameworks for embedded software development include extensive class libraries, tools and broad community support, allowing you to deliver embedded applications faster and more reliably. The Micromint Bambino 200 is powered by an NXP LPC4330, the first dual-core ARM Cortex-M microcontroller. Its Cortex-M4 and Cortex-M0 cores are both capable of 204 MHz. With 264 KB SRAM onboard and 4 MB of flash, developers can fulfill demanding requirements in monitoring, instrumentation, data acquisition, process control and many other applications. A USB device port serves both as a power source and for data communications or debugging. I/O starts with two buttons and two LEDs and can be extended using 5 Gadgeteer sockets. Hardware and software licensing is open source, giving developers the freedom to adapt the Bambino to their specific requirements.
For applications requiring networking and additional I/O we offer the Micromint Bambino 200E, including the same base features but with enhanced functionality. Flash goes up to 8 MB and 10 Gadgeteer sockets are available for I/O modules. 100 megabit Ethernet is onboard, as well as microSD and Xbee sockets. Besides the built-in ports, a JTAG for low level debugging, a coin cell battery for the RTC and screw terminals for power can be easily implemented in the field by soldering components.
Pricing for the Micromint Bambino 200 and 200E in single quantities is $24.95 and $39.95 respectively. Volume pricing and custom configurations are available by contacting our Sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it. .
Features
|
Bambino 200
Bambino 200E
|
(Click to enlarge)
 Bambino 200E
(Click to enlarge)
|
Sockets
| Socket | Available functions | ||||
| 1 | O–Analog Out | S–SPI | X–3 GPIO | ||
| 2 | I–I2C | P–PWM | S – SPI | U–UART | Y–7 GPIO |
| 3 | A–Analog In | O–Analog Out | P–PWM | ||
| 4 | A–Analog In | I–I2C | Y–7 GPIO | ||
| 5 | K–UART RTS/CTS | U–UART | X–3 GPIO | ||
| 6 (*) | I–I2C | S–SPI | Y–7 GPIO | ||
| 7 (*) | I–I2C | U–UART | Y–7 GPIO | ||
| 8 (*) | D–USB Device | H–USB Host | I–I2C | ||
| 9 (*) | Y–7 GPIO | ||||
| 10 (*) | S–SPI | U–UART | X–3 GPIO | ||
(*) Socket only available on Micromint Bambino 200E.
Documentation
Option - JTAG Interface
The JTAG interface option includes a Cortex-M 10-pin (0.05"/1.27mm) JTAG connector for debugging. This option is required to debug applications using a JTAG probe (not included). It is highly recommended for multicore debugging.
Availability
The Micromint Bambino 200 and 200E are now shipping.
| Bambino 200: $29.95 |  |
| Bambino 200E: $44.95 | |
