Using efficient mechanical relays, the BCC40R provides contact-closure on/off control of eight AC-or DC-powered devices for data acquisition and control applications. The relays are controlled by writing to a board-specific I/O address and can be controlled either as a set of eight relays at a single I/O address or individual relays at eight separate I/O addresses. Four of the relays have single-pole, double-throw (SPDT) output connections and four relays have single-pole, single-throw (SPST) output connections.
Click here to download BCC40D/R datasheet.
| Size: | 4.5" x 6" | Power (fully loaded): | +12 V at 500 mA | |
| Industrial Temp. Available: | Yes | Comments: | 3 A, 120-VAC contacts, latched relay outputs | |
| Features: Onboard LED, on/off status indicator for each channel | ||||
Email or Call for Pricing
The BCC40D uses industry-standard Opto-22 or Gordos-type optoisolated I/O modules to provide on/off control and input monitoring of eight 115-230-VAC or 5-48-VDC devices. Multiple BCC40D boards can be used together in a single system. Individual channels can be read or updated by reading from or writing to a single I/O address. The BCC40D can be directly controlled from BASIC or assembly language and is as simple to use as setting or reading a parallel port. Each optoisolated channel is fused and has quick-disconnect terminals (screw terminals optional in OEM quantities). Both input or output modules and AC or DC functions can be intermixed on the same BCC40D board.| Size: | 4.5" x 6" | Power (fully loaded): | +5 V at 50 mA | |
| Industrial Temp. Available: | Yes | Comments: | Uses industry-standard Opto-22 modules, dual port addressing | |
| Features: Onboard LED, on/off status indicator for each channel | ||||
Email or Call for Pricing
BCC18 Dual Serial Interface
The BCC18 is a general-purpose, dual-serial-port interface board for use with the Micromint BCC bus. The BCC18 serial board contains two serial interfaces. Each interface can be either RS-232C, RS-422, or RS-485. The hard-wired serial interface uses an industry-standard 8251A USART (Universal Synchronous/ Asynchronous Receiver/Transmitter) capable of supporting asynchronous serial communications at speeds up to 19.2 kbps and synchronous serial communications at speeds up to 64 kbps.
Size: 4.5" x 6"
Power (fully loaded): +5 V at 100 mA, ±12 V at 25 mA
Industrial Temp. Available: Yes
Comments: Independent data rates up to 19.2 kbps asynchronous or 64k synchronous
Email or Call for Pricing
The BCC30A 12-bit-plus-sign analog-to-digital converter board is a 16 channel high-speed unit designed for use with all BCC-bus computer/designed for use with all BCC-bus computer/controllers. The BCC30A monitors up to 16 single-ended (or 8 differential) signals in a bipolar range of –5 to +5V or 16 single-ended signals in a unipolar range of 0 to +5 V. The BCC30A A/D converter board is easily accessible from BASIC, Forth, or assembly language and multiple boards can be used in a single system. Channels are individually addressable and can be converted at up to 20,000 samples per second. The high-speed ADC is unique in that its 16 channels (8 channels differential) have individually programmable input gains. Using gain multiplication on low-level signals provides the performance of a 16-bit ADC at a 12-bit price. The BCC30A also has 4 channels of high-performance, wide-range-output DAC.Click here to download BCC30A datasheet.
| Size: | 4.5" x 6" | Power (fully loaded): | +5 V at 175 mA, +12 V at 60 mA, -12 V at 25 mA |
|
| Industrial Temp. Available: | Yes | Comments: | Superior analog input protection. Programmable gain gives 14-bit A/D equivalence | |
| Features: 4-ch, 0-5 V, 0-10 V, -5 to+ V, 12-bit D/A converter, 1 V/µs | ||||
The BCC180 can be used to vastly improve the execution speed of existing Z80 installations or to provide a complete performance solution for new applications. Designed from the ground up for efficiency, low power, and performance, the BCC180 bridges the gap between Micromint’s disk-based SB180 computer line and our BCC-bus process controller products. Using the same Z180 Z80-compatible CMOS processor as the SB180LO and using either high-level language or assembly code, the BCC180 connects to a variety of off-the-shelf BCC-bus I/O interface boards to function as a complete data acquisition and control system, or to function as a cost-effective single-board controller with abundant onboard I/O and memory.|
Processor:
|
Z180
|
Clock speed:
|
9.216 MHz
|
|
|
Max Memory:
|
384 KB
|
SRAM/EPROM:
|
128 KB/128 KB/256 KB
|
|
|
Digital I/O:
|
48 bits, 2 PPIs
|
Serial Ports:
|
1 RS-232
1 RS-232/-485/-422 |
|
|
External Interrupts:
|
4
|
Timers:
|
2
|
|
|
Size:
|
4.5" x 8.5"
|
Power (fully loaded):
|
+5 V at 150 mA,
±12 V at 25 mA |
|
|
Industrial Temp. Available:
|
Yes
|
Additional Features:
|
Optional EPROM programmer,
real-time clock (optional) |
