Eagle Examples

The Micromint Eagle includes an extensive set of code examples to help you get started with your applications. This table summarizes the examples available for different models of the Eagle line. Our support staff (This email address is being protected from spambots. You need JavaScript enabled to view it. ) can assist you with questions on specific functions.

Example	Description	Eagle 100	Eagle 50E	Eagle 50
adc	Analog to Digital Converter
aes_expanded_key	AES Pre-expanded Key
aes_set_key	AES Normal Key
bitband	Grouping bits together
blinky	Blink on-board LED
boot_eth	Ethernet bootloader
boot_serial	Serial bootloader
cpld_isa	Access PC/104 board
cpld_monitor	Monitor events in CPLD
cpld_update	Update CPLD firmware
cpld_xio	LCD interfacing using Extended I/O
dac_ssi	Digital to Analog Converter	(*)	(*)	(*)
enet_io	Control GPIOs using lwIP web server
enet_lwip	Simple lwIP web server
enet_ptpd	Precision Time Protocol using lwIP
enet_snmp	Simple Network Management Protocol
enet_tftpd	TFTP server using lwIP
enet_uip	Simple uIP web server
gpio_jtag	Switch between GPIO and JTAG
hello	Simple console output
hibernate	Hibernation		(*)	(*)
i2c_atmel	i2c synchronous serial I/O to EEPROM
interrupts	Demonstrate use of interrupts
kpad_lcd	Keypad and LCD I/O using CPLD or GPIO
mpu_fault	Memory Protection Unit
pwmgen	Generate PWM using bit banging
rs232_485	RS232-RS485 switch		(*)	(*)
sd_card	microSD card using FAT file system
ser2enet	Serial to Ethernet converter
timers	Timer interrupts
uart_echo	UART interrupts
watchdog	Watchdog example

(*) Requires the I/O Plus option