BCC40R


Using efficient mechanical relays, the BCC40R provides contact-closure on/off control of eight AC-or DC-powered devices for data acquisition and control applications. The relays are controlled by writing to a board-specific I/O address and can be controlled either as a set of eight relays at a single I/O address or individual relays at eight separate I/O addresses. Four of the relays have single-pole, double-throw (SPDT) output connections and four relays have single-pole, single-throw (SPST) output connections.

 

Click here to download BCC40D/R datasheet.

Size: 4.5" x 6" Power (fully loaded): +12 V at 500 mA
Industrial Temp. Available: Yes Comments: 3 A, 120-VAC contacts, latched relay outputs
Features: Onboard LED, on/off status indicator for each channel

 

This email address is being protected from spambots. You need JavaScript enabled to view it. or Call for Pricing

BCC40DThe BCC40D uses industry-standard Opto-22 or Gordos-type optoisolated I/O modules to provide on/off control and input monitoring of eight 115-230-VAC or 5-48-VDC devices. Multiple BCC40D boards can be used together in a single system. Individual channels can be read or updated by reading from or writing to a single I/O address. The BCC40D can be directly controlled from BASIC or assembly language and is as simple to use as setting or reading a parallel port. Each optoisolated channel is fused and has quick-disconnect terminals (screw terminals optional in OEM quantities). Both input or output modules and AC or DC functions can be intermixed on the same BCC40D board.
Click here to download BCC40D/R datasheet.

Size: 4.5" x 6" Power (fully loaded): +5 V at 50 mA
Industrial Temp. Available: Yes Comments: Uses industry-standard Opto-22 modules, dual port addressing
Features: Onboard LED, on/off status indicator for each channel

 

This email address is being protected from spambots. You need JavaScript enabled to view it. or Call for Pricing

BCC18 Dual Serial Interface

BCC18The BCC18 is a general-purpose, dual-serial-port interface board for use with the Micromint BCC bus. The BCC18 serial board contains two serial interfaces. Each interface can be either RS-232C, RS-422, or RS-485. The hard-wired serial interface uses an industry-standard 8251A USART (Universal Synchronous/ Asynchronous Receiver/Transmitter) capable of supporting asynchronous serial communications at speeds up to 19.2 kbps and synchronous serial communications at speeds up to 64 kbps.

Size: 4.5" x 6"
Power (fully loaded): +5 V at 100 mA, ±12 V at 25 mA
Industrial Temp. Available: Yes
Comments: Independent data rates up to 19.2 kbps asynchronous or 64k synchronous

 

This email address is being protected from spambots. You need JavaScript enabled to view it. or Call for Pricing

BCC30AThe BCC30A 12-bit-plus-sign analog-to-digital converter board is a 16 channel high-speed unit designed for use with all BCC-bus computer/designed for use with all BCC-bus computer/controllers. The BCC30A monitors up to 16 single-ended (or 8 differential) signals in a bipolar range of –5 to +5V or 16 single-ended signals in a unipolar range of 0 to +5 V. The BCC30A A/D converter board is easily accessible from BASIC, Forth, or assembly language and multiple boards can be used in a single system. Channels are individually addressable and can be converted at up to 20,000 samples per second. The high-speed ADC is unique in that its 16 channels (8 channels differential) have individually programmable input gains. Using gain multiplication on low-level signals provides the performance of a 16-bit ADC at a 12-bit price. The BCC30A also has 4 channels of high-performance, wide-range-output DAC.

Click here to download BCC30A datasheet.
Size: 4.5" x 6" Power (fully loaded): +5 V at 175 mA,
+12 V at 60 mA,
-12 V at 25 mA
Industrial Temp. Available: Yes Comments: Superior analog input protection. Programmable gain gives 14-bit A/D equivalence
Features: 4-ch, 0-5 V, 0-10 V, -5 to+ V, 12-bit D/A converter, 1 V/µs
This email address is being protected from spambots. You need JavaScript enabled to view it. or Call for Pricing
BCC180The BCC180 can be used to vastly improve the execution speed of existing Z80 installations or to provide a complete performance solution for new applications. Designed from the ground up for efficiency, low power, and performance, the BCC180 bridges the gap between Micromint’s disk-based SB180 computer line and our BCC-bus process controller products. Using the same Z180 Z80-compatible CMOS processor as the SB180LO and using either high-level language or assembly code, the BCC180 connects to a variety of off-the-shelf BCC-bus I/O interface boards to function as a complete data acquisition and control system, or to function as a cost-effective single-board controller with abundant onboard I/O and memory.
Click here to download BCC180 datasheet.
Processor:
Z180
Clock speed:
9.216 MHz
Max Memory:
384 KB
SRAM/EPROM:
128 KB/128 KB/256 KB
Digital I/O:
48 bits, 2 PPIs
Serial Ports:
1 RS-232
1 RS-232/-485/-422
External Interrupts:
4
Timers:
2
Size:
4.5" x 8.5"
Power (fully loaded):
+5 V at 150 mA,
±12 V at 25 mA
Industrial Temp. Available:
Yes
Additional Features:
Optional EPROM programmer,
real-time clock (optional)
This email address is being protected from spambots. You need JavaScript enabled to view it. or Call for Pricing

More Articles...

  1. BCC52CX
  2. BCC52
  3. BCC Line