Home
Products
- By Family
- By Core
  - ARM
  - AVR
  - 8051
  - 68HC11
  - PIC
  - Z180
Services
- Custom Design
- Turn-Key Solutions
Support
- FAQ
  - Domino
  - PicStic
  - AnswerMan
- Application Notes
  - Domino
  - PicStic
  - Micro64/128
  - MicroBolt
  - 80C52-Basic
  - PLIX
  - AnswerMan
- Downloads
Wiki
Sales
About

Micromint Bambino 210 SBC The Micromint Bambino 210 is a multi-core SBC designed for compatibility with the mbed framework. It is powered by an NXP LPC4330, a dual-core ARM Cortex-M microcontroller. Its Cortex-M4 and Cortex-M0 cores are both capable of 204 MHz. The Bambino 210 is available for under $27 in single quantities.

More info...

Micromint Bambino 200 SBC The Micromint Bambino 200 is the first multi-core SBC compatible with the .NET Gadgeteer and mbed frameworks. It is powered by an NXP LPC4330, the first dual-core ARM Cortex-M microcontroller. Its Cortex-M4 and Cortex-M0 cores are both capable of 204 MHz. The Bambino 200 is available for under $25 in single quantities.

More info...

Micromint Lincoln 60 SBC Powered by a 120 MHz NXP LPC1769 ARM Cortex-M3 core, the Micromint Lincoln 60 can fulfill demanding requirements in signal processing, monitoring, instrumentation, data acquisition, process control, factory automation and many other applications. The Lincoln 60 uses the compact picoITX form factor and is available for under $55 in single quantities.

More info...

Top Product Lines

Lincoln 60E

ARM Cortex-M SBCs

Our Bambino, Lincoln and Eagle product lines take advantage of the high efficiency and low cost of the ARM Cortex-M microcontrollers by NXP and Texas Instruments. Starting below $25 in single quantities, these controllers are a great choice for data loggers, process controllers, smart instruments and many other applications.

Bambino 210 (New!)	Eagle 50
Bambino 200	Eagle 100
Lincoln 60	picoJTAG

Electrum 100

ARM Linux SBCs

Our Electrum product line is based on the the ARM9 with Debian Linux. With a 400 MHz Atmel AT91SAM9G20 and starting below $100 in single quantities, the Electrum offers unparalleled price/performance for applications that require reliable multitasking and extensive networking functionality.

Electrum 100

Electrum 200

Domino

Domino Modules

Our highly popular Domino modules are used in thousands of installations worldwide. Programmable in BASIC and with the most popular I/O interfaces, you can get your embedded application up and running very quickly!

Modules	RTC Boards
Components	BCC Boards

Micromint USA

Published on Tuesday, 20 May 2008 09:33

The BCC52 computer/controller is one of our hottest selling stand-alone single-board microcomputers. Its cost-effective architecture needs only a power supply and terminal to become a complete development or end-use system. Programmable in BASIC or machine language, the BCC52 uses Micromint’s 80C52-BASIC CMOS microprocessor, which contains a ROM-resident, 8-KB, floating-point, BASIC-52 interpreter.

The BCC52 contains sockets for up to 48 KB of RAM/EPROM, an "intelligent" 2764/128 EPROM programmer, three parallel ports, a serial terminal port with auto baud rate selection, a serial printer port, and is bus compatible with the full line of BCC-bus expansion boards. The BCC52 bridges the gap between expensive programmable controllers and hard-to-justify, price-sensitive control applications. BASIC-52’s full floating-point BASIC is fast and efficient enough for the most complicated tasks, while its cost-effective design allows it to be considered for many new areas of implementation. It can be used both for development and end-use applications.

Click here to download BCC52 datasheet.

Processor:	80C52 w/BASIC	Clock speed:	11.05 MHz
Max Memory:	48 KB	SRAM/EPROM:	32 KB/32 KB (8 KB devices)
Digital I/O:	24 bits, PIA	Serial Ports:	1 RS-232, 1 RS-232 printer output
External Interrupts:	2	Timers:	3
Size:	4.5" x 6"	Power (fully loaded):	+5 V at 150 mA, ±12V at 25mA
Industrial Temp. Available:	Yes	Additional Features:	Onboard EPROM programmer, real-time clock (optional)