Bambino 210

Overview

bambinocoin

The Micromint Bambino 210 is a multi-core SBC designed for compatibility with the mbed framework. This popular framework for embedded software development includes extensive class libraries, tools and broad community support, allowing you to deliver embedded applications faster and more reliably. The Micromint Bambino 210 is powered by an NXP LPC4330, the first dual-core ARM Cortex-M microcontroller. Its Cortex-M4 and Cortex-M0 cores are both capable of concurrent 204 MHz operation. With 264 KB SRAM onboard and 4 MB of flash, developers can fulfill demanding requirements in monitoring, instrumentation, data acquisition, process control and many other applications. Two USB device ports serve both as power sources and for data communications or debugging. I/O starts with two buttons and four LEDs and can be extended using Arduino compatible shields. Hardware and software licensing is open source, giving developers the freedom to adapt the Bambino to their specific requirements.

For applications requiring networking and additional I/O we offer the Micromint Bambino 210E, including the same base features but with enhanced functionality. Flash goes up to 8 MB and extended I/O headers are available for interfacing additional I/O modules. 100 megabit Ethernet is onboard, as well as microSD and Xbee sockets. Besides the built-in ports, boards can be ordered with optional mbed HDK and a JTAG interfaces. A coin cell battery for the RTC, screw terminals for power and two PMOD interfaces can be easily implemented in the field by soldering components.

Pricing for the Micromint Bambino 210 and 210E in single quantities is $26.95 and $41.95 respectively. Volume pricing and custom configurations are available by contacting our Sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it. .

Features

Bambino 210

 NXP LPC4330 @ 204 MHz
 Dual core ARM® Cortex™-M4/M0
 264 KB SRAM, 4 MB Flash
 High-speed USB 2.0 device port
 Full-speed USB 2.0 device port
 mbed HDK
 2 buttons, 4 LEDs
 Arduino-compatible headers
 Form factor 4” x 2.3” (101.6 x 58.4 mm)

Bambino 210E

 Same base features as Bambino 210 plus:
 8 MB Flash
 10/100 Mbps Ethernet
 microSD socket
 Xbee socket
 Extended I/O headers
 Power jack, 7 – 12 VDC

Options

 JTAG interface
 RTC coin cell battery
 PMOD I2C interface
 PMOD SPI interface

(Click to enlarge)
bam210epinout

Bambino 210E
(Click to enlarge)

Headers

Bambino 210 Headers

Bambino 210

Bambino 210E Headers

Bambino 210E

mbed HDK

bam210-hdk

The mbed HDK includes an NXP LPC11U35 microcontroller with the mbed CMSIS-DAP firmware for better integration with mbed tools. It implements the following features:

  • USB Mass Storage Device for drag and drop programming of the LPC4330
  • USB Communications Device Class for Serial Communication with the LPC4330
  • USB HID CMSIS-DAP for debugging LPC4330 firmware
  • USB bootloader for updating the LPC11U35 firmware

Option - JTAG Interface

bam210-jtag

The JTAG interface option includes a Cortex-M 10-pin (0.05"/1.27mm) JTAG connector for debugging. This option is required to debug applications using a JTAG probe (not included). It is highly recommended for multicore debugging. A Cortex-M 20-pin Debug+ETM connector is available by special order for applications requiring trace and profiling support.

Documentation

Bambino 210 Documentation (Wiki)

Bambino 210 Support Forum

Bambino 210 Schematics

 

 

Bambino 210: $26.95 This email address is being protected from spambots. You need JavaScript enabled to view it.
Bambino 210E: $41.95 This email address is being protected from spambots. You need JavaScript enabled to view it.