Overview

The Micromint picoJTAG is a low-cost debugger for ARM Cortex M3 microcontrollers. It combines JTAG debugging with a RS-232 Virtual COM port allowing software developers to connect a debugger and serial port to a computer with a single USB cable. The picoJTAG can also provide power to targets that are capable of accepting power on the 20-pin JTAG connector. Drivers are provided for IAR, Keil and GNU toolchains supporting ARM Cortex M targets. Third party FTDI debugger drivers can be used to support other targets.

Features

USB2.0 (high-speed, 480Mbits/sec)
RS-232 Virtual COM Port
Based on the FT2232H
Plugs directly into Arm's standard 20-pin JTAG connector
Capable of supplying power to targets JTAG connector
33.02mm x 47.12mm (1.3" x 1.85")

Options

Serial port adapter cable - $4.00
• 10-pin IDC to DB9M connector
• 10-pin IDC to 10-pin IDC

 

 

PicoJTAG

picoJTAG

 

Documentation

picoJTAG Documentation (Wiki)

picoJTAG Schematics

 

This email address is being protected from spambots. You need JavaScript enabled to view it.

Shopping Cart

Your shopping cart is empty!